페이지 1
User Manual LUMENA FAN BOOST 루메나 FAN BOOST 무선 써큘레이터 We are LUMENA, creative life style brand We think and develop dreams, idea and products About LUMENA는 심플함과 정직함을 추구합니다.
LUMENA의 디자인은 라이프 스타일 기반의 다양한 제품을 통해 생활 속의 기본을 생각합니다.
모든 과정에 세심한 기술력과 장인 정신을 담았습니다 완벽한 품질에 대한 약속은 LUMENA의 디자인 핵심 요소입니다
Contact (우)48071 부산광역시 해운대구 송정중앙로5번길 98 (주)루메나 E-Mail_help@lumena co kr Web_www lumena co kr Tel_1800-5402 1 Parts 제품 명칭 안전망 Safety Net 安全网 폴스탠드 Pole Stand 撑竿架 전원버튼 Power Button 电源按钮 타이머버튼 Timer Button 定时器按钮 LED표시등 Indicator LED 电量指示灯 입력단자 Input 输入端子 행거고리 Body Hanger 挂钩 연결나사 Screw 连接螺钉 Hot Shoe Socket 三角架插口 리모컨 Remote Control 遥控器 케이블 USB Type-C Cable USB充电线 3 How to Charge 본체 충전 방법 Input 충전부 본체 Input에 USB Type-C 케이블과 충전어댑터를 연결하면 LED충전 표시등이 점멸하면서 충전이 시작됩니다.
완료 LED 충전 표시등이 점등됩니다
(충전 어댑터 별매) 제품 충전 사용 전용 케이블을 사용하십시오
일반 케이블은 헤드 각도 조절 본체 댐퍼 간섭으로 충전 단자가 파손될 있습니다.
When you connect the USB Type-C cable and the charging adapter to the main input, the LED charging light turns up and starts charging The top LED is on continuously even after the charge is complete and changes to the wind speed indicator when operating (Charging adapter sold separately) 将USB-C充电线和充电适配器连接到主机的input, LED充电指示灯亮起, 开始充电 底部LED会持续亮起 工作时会变成风速显示 (充电器单独售卖) 4 Remote Controler 리모컨 Remote Control Pairing 리모컨 페어링 방법 1 제품OFF 상태에서 본체 타이머 버튼을 6초 이상 누르면 타이머 LED 점멸 2 버튼 누른 채로 LED점멸 상태를 확인한 리모컨의 전원버튼 1회 누름 3 타이머 LED 표시등 깜빡임 멈추며 페어링 세팅 완료 작동 최초 1회 진행 1 With the product turned off, press the timer button on the main unit for more than 6 seconds and the timer LED blinks While holding down the timer button, press once on the power button on the remote control The pairing setting is complete when the timer LED sign stops blinking Applied only once when operating the remote control for the first time How to Use 제품 사용 방법 Wind Control 풍속 설정 제품을 충전시킨 본체 후면의 전원버튼을 눌러 작동을 진행합니다.
버튼을 누르는 횟수에 따라 풍속이 조절되며, 이때 왼쪽 LED 표시등은 풍속의 단계를 나타냅니다 조작 3초간 풍량 단계가 표시되며, 3번 깜빡인 다시 배터리 잔량이 표시됩니다.
버튼 1회 1단계 미풍 작동 버튼 2회 2단계 약풍 작동 버튼 3회 3단계 강풍 작동 버튼 4회 4단계 최대 풍속 버튼 5회 작동 종료 사용 전원버튼 2초간 누름 전원 종료 When the main unit is charged, press the power button to activate it The left LED sign shows the wind speed level which varies depending on the number of times the button is pressed The wind level is displayed for 3 seconds, blinks 3 times, and the remaining battery level is displayed again on the power button Push button once Minimum wind speed Push once more Second level wind speed Push once more Third level wind speed Push once more Maximum wind speed Push once more Shutdown during operation Press and hold the power button for 2 seconds while in use to power off 按下电源按钮运行 此时左边的LED标示灯显示风速等级 之后闪3次后重新显示电池余量 按一次开关 最低风速 按两次开关 二级风速 按三次开关 三级风速 按四次开关 最大风速 按五次开关 关闭风机 *使用过程中按下电源按钮2秒钟后电源结束 Battery Indicator 배터리 램프 26%~50% 51%~75% 76%~100% 완충 용량 미만 첫번째 LED 깜빡임 Timer setting 타이머 설정 타이머 버튼을 누르거나 리모컨의 [타이머] 버튼을 누르면 단계별로 시간을 설정할 있습니다.
설정한 시간이 경과하면 자동으로 정지합니다.
우측 타이머 램프를 통해 설정 시간을 확인 있습니다.
Press the timer button or press [Timer] on the remote control to set the time level When the timer time elapses, the selected air volume automatically stops You can see the set time with the timer lamp on the right 设定时间经过以后会自动停 止 通过右侧定时显示灯确认设定的时间 Timer Indicator 타이머 램프 1시간 1Hour 1小时 2시간 2hours 2小时 4시간 4hours 4小时 8시간 8hours 8小时 작동 종료 Timer Off 废除定时 5 How to Install 제품 설치 방법 Connect 결합 폴스탠드 1-2 결합 본체 행거부에 폴스탠드 연결 나사로 고정하여 거치 사용 가능합니다.
나사는 별도로 분리되지 않습니다 After connecting the pole stand it can be fixed to the body hanger with pole stand connecting screw Do not separate the connecting screws 放置使用 루메나 FAN BOOST는 전용 비너고리를 활용하여 타프나 삼각대에 거치하여 사용 가능합니다.
LUMENA FAN BOOST can be used as Tarp fan by connecting binner ring and hanging it LUMENA FAN BOOST挂上专用挂钩以后, 可以当吊扇使用 고정하여 사용 삼각대의 고정나사를 소켓에 돌려 끼워 고정시킵니다 나사를 이용한 연결 가능) Use the sawtooth serrations on the integrated hanger to easily adjust the angle from which to hang your device